Nikon 1546 Manuale Utente

77

z

Highlight Start > On and press 

J (to return to 

the shooting menu without starting the interval 
timer, highlight Start > Off and press 

J). The 

first shot will be taken at the specified starting 
time, or after about three seconds if Now was 
selected for Choose start time in Step 2. The self-timer lamp blinks while 
shooting is in progress; shooting will continue at the selected interval until all 
shots have been taken. Note that because shutter speed and the time needed 
to record the image to the memory card may vary from shot to shot, the interval 
between a shot being recorded and the start of the next shot may vary.

D

Before beginning interval timer photography, take a test shot at current settings and view 
the results in the monitor.  To ensure that shooting starts at the desired time, check that the 
camera clock is correctly set (0 20). Settings can not be changed while interval timer 
photography is in progress.

Use of a tripod is recommended.  Mount the camera on a tripod before shooting begins.

To ensure that shooting is not interrupted, be sure the EN-EL9a battery is fully charged or use 
an optional EH-5a AC adapter and EP-5 power connector.

D

Bracketing can not be used with interval timer shooting.

A

Before starting the interval timer, remove the 
rubber eyecup (q) and insert the supplied 
DK-5 eyepiece cap as shown (w). This 
prevents light entering via the viewfinder 
interfering with exposure. Hold the camera 
firmly when removing the eyepiece cup.

A

Regardless of the mode selected, the camera automatically takes one photograph at each 
interval; the self-timer and remote control can not be used. Camera noise is reduced in quiet 
shutter-release mode.

A

To interrupt interval timer shooting, turn the camera off or rotate the mode dial to another 
position. Returning the monitor to the storage position does not interrupt interval timer 
shooting.

q

w