Nikon (1855mm Kit) Red Guida Utente

Pagina di 228
34
z
D
Before Using the Remote Control
Before using the remote control for the first time, remove the clear plastic battery-insulator 
sheet.
A
Cover the Viewfinder
When taking photos without your eye to the 
viewfinder, remove the DK-20 rubber eyecup 
(q) and insert the supplied DK-5 eyepiece cap 
as shown (w). This prevents light entering via 
the viewfinder interfering with exposure. Hold 
the camera firmly when removing the rubber 
eyecup.
D
Using the Built-in Flash 
Before taking a photograph with the flash in PSA, or M modes, press the 
M (Y) button to 
raise the flash and wait for the 
M indicator to be displayed in the viewfinder (0 24). Shooting 
will be interrupted if the flash is raised while a remote control mode is in effect or after the 
self-timer has started. If the flash is required, the camera will only respond to the ML-L3 
shutter-release button once the flash has charged. In auto or scene modes in which the flash 
pops up automatically, the flash will begin charging when a remote control mode is 
selected; once the flash is charged, it will automatically pop up and fire when required.
In flash modes that support red-eye reduction, the red-eye reduction lamp will light for 
about one second before the shutter is released in quick-response remote mode. In delayed 
remote mode, the self-timer lamp will light for two seconds, followed by the red-eye 
reduction lamp which lights for one second before the shutter is released.
A
See Also
For information on choosing the duration of the self-timer and the number of shots taken, 
see the Self-timer option in the setup menu (
0 141). For information on choosing how 
long the camera will wait for a signal from the remote, see the Remote on duration option 
in the setup menu (
0 141). For information on controlling the beeps that sound when the 
self-timer and remote control are used, see the Beep option in the setup menu  (
DK-20 rubber eyecup
DK-5 eyepiece cap
q
w