MINOLTA Dynax 7 Manuale Utente

• If more than 3.0EV, only + or - will appear, instead of a value.
• Press the display-selection button once again to cancel the bright-

ness-distribution display while still pressing the AE-lock button.

• If you release your finger from the AE-lock button, both brightness dis-

tribution and locked exposure will be canceled.

• Shutter speed, aperture, and exposure compensation appear in the

top portion of the display.

• If a non-displayed setting is changed, the operation display appears.
• This feature is useful for monitoring which areas of the picture are

under or over-exposed, and allows the user to also confirm the varia-
tion on the brightness distribution with the exposure-compensation
dial. 

• If bracketing is selected, the normal position (+/- 0) of the bracketing

series will be displayed in the brightness-distribution display.

• Brightness-distribution display shows values without flash. When flash

fires, displayed values may be slightly lower than the values without
flash.

• The EV scale is marked in 1/2 or 1/3EV increments depending on the

current setting of the exposure copmensation dial (p. 77-78).

85

84

• The shading appears as;

White : +1EV or more.
Gray : when between -1EV and +1EV.
(No value given when gray)
Black : -1EV or less.

The display shows the difference between the
locked value “0” and the output from each of
the 14-honeycomb segments. 

• If you press the display-selection button, the

meter-index display appears in the navigation
display. When you press the AE-lock button,
the index shows the differences between the
locked exposure and the exposure currently in
the spot-metering area.

• The EV scale is marked in 1/2 or 1/3EV increments depending on the

current setting of the exposure compensation dial (p. 77).

•

or 

will blink in the meter index if the settings will over or underex-

pose the subject by more than 3.0EV.

Shutter speed

Aperture 

Difference is between -1EV
and +1EV.

2EV under

Exposure compensation 

3 EV over
the locked
value.