Canon DIGREB1855XT Manuale Utente
20
For details on the battery, refer to the instructions for Battery Pack NB-2LH.
1
Remove the cover.
2
Attach the battery.
¡
Align the battery’s front edge with the
battery charger’s index line. While
pressing down the battery, slide it in
the direction of the arrow.
battery charger’s index line. While
pressing down the battery, slide it in
the direction of the arrow.
¡
To detach the battery, follow the
above procedure in reverse.
above procedure in reverse.
3
For CB-2LT
Flip out the prongs and recharge
the battery.
Flip out the prongs and recharge
the battery.
¡
As shown by the arrow, flip out the
battery charger’s prongs.
battery charger’s prongs.
¡
Insert the prongs into a power outlet.
For CB-2LTE
Connect the power cord and
recharge the battery.
Connect the power cord and
recharge the battery.
¡
Connect the power cord to the charger
and insert the plug into the power outlet.
and insert the plug into the power outlet.
s
Recharging starts automatically and
the recharge lamp turns red.
the recharge lamp turns red.
s
When the battery is fully recharged,
the recharge lamp will turn green.
the recharge lamp will turn green.
¡
It takes about 90 minutes to fully
recharge a completely exhausted
battery.
recharge a completely exhausted
battery.
Recharging the Battery
Battery pack slot index
CB-2LT
CB-2LTE