Canon EOS DIGITAL REBEL XT Manuale Utente

94

Mirror lockup is enabled with C.Fn-7 [Mirror lockup] set to [1: Enable]
(p.150). The mirror can be swung up separately from when the 
exposure is made. This prevents mirror vibrations which may blur the 
image during close-ups or when a super telephoto lens is used. Set 
Custom Functions with [

b Custom Functions (C.Fn)].

s

The mirror will swing up.

s

The picture is taken and the mirror 
goes back down.

N

¡

In very bright places such as at the beach or ski ground on a sunny day, 
take the picture promptly after mirror lockup.

¡

During mirror lockup, do not point the camera lens at the sun. The sun’s 
heat can scorch and damage the shutter curtains.

¡

If you use bulb exposures, the self-timer, and mirror lockup in 
combination, keep pressing the shutter button completely (2 sec. self-
timer + bulb exposure time). During the 2-sec. self-timer countdown, if 
you let go of the shutter button, there will be a shutter-release sound. 
This is not the shutter being released (no picture is taken).

¡

During mirror lockup, the drive mode will be set to single shooting 
regardless of the current drive mode setting (single or continuous).

¡

If you use the self-timer and mirror lockup, press the shutter button 
completely and the shot will be taken 2 sec. after the mirror goes up.

¡

The mirror locks up, and after 30 seconds, it will go back down automatically. 
Pressing the shutter button completely again locks up the mirror again.

¡

For mirror lockup shots, using Remote Switch RS-60E3 (optional) is 
recommended.

¡

Remote Controller RC-5 (optional) can also be used for mirror lockup shots. Press 
the transmit button and the mirror locks up before the shot is taken 2 sec. later.