Canon 8231B001 Manuale Utente

87

X

X

After a connection is established with 

the smartphone, the smartphone name 

is displayed on the camera. (This screen 

will close in about one minute.)

z

z

Use the smartphone to import images 

from the camera to the smartphone.

z

z

Use the smartphone to end the connection; 

the camera will automatically turn off.

When you are in the vicinity of an access point that you have 

previously connected to, the camera will automatically connect to 

it in step 3. To change access points, select [Switch Network] from 

the screen that will be displayed when the connection is being 

established, and follow steps 4 – 6 in “Adding a Computer” (

To control the camera manually, either end the connection from the smartphone 

or restart the camera after pressing the power button to turn it off momentarily.

Once a connection has been established with a smartphone, you can 

automatically reconnect to the registered device by simply pressing the < > 

button, even if the camera has been turned off.

The image quality level for movies that can be sent may differ depending

on the smartphone. Refer to the instruction manual provided with your 

smartphone for details.

To remove a registered smartphone, touch [H] and then [n], and on 

the [

3] tab, choose [Mobile Device Connect Button]. After the confirmation

message, touch [OK].

If the date and time have not been set, the [Date/Time] screen will be 

displayed in step 2. Set them following the steps in “Setting the Date and 

Time” (

Only one smartphone can be assigned to the < > button.

To assign a different one, clear the current assignment. Touch [

H] 

and then [

n], and on the [3] tab, choose [Mobile Device Connect 

Button]. After the confirmation message, touch [OK], and then assign the

new smartphone to the button.

When registering multiple smartphones, add them to your list of devices 

You can also add a smartphone by touching [

] in Playback mode and 

then touching [ ], which is displayed in the Wi-Fi menu.

The procedure for adding a smartphone through the Wi-Fi menu varies from 

the < > button approach as follows:

The connection is established through the Wi-Fi menu (

  88).  You 

cannot connect to a smartphone by pressing the < > button.

The camera will remain on, even after you have disconnected from the 

smartphone.

You can operate the camera to send images to the smartphone.

Multiple smartphones can be added.

After selecting a smartphone in step 6 of “Establishing the Smartphone 

decide whether to allow images on the camera to be displayed on the 

smartphone) is displayed. If you select [No], images on the camera will 

not be displayed on the smartphone.

To change privacy settings for registered smartphones, choose the 

  102), and then choose [View Settings].

When a connection destination is set using the Touch Actions setting 

connected destination from the next time by just dragging on the screen 

without needing to perform the connection operation.

COP

Y