Casio EX-Z250 Manuale Utente

13

Quick Start Basics

As battery power is consumed, a battery indicator on the monitor screen indicates 
remaining power as shown below.

 indicates battery power is low. Charge the battery as soon as possible.

Recording is not possible when 

 is indicated. Charge the battery immediately.

• The level shown by the battery indicator may change when you switch between the 

REC mode and PLAY mode.

• Leaving the camera for about two days with no power supplied while the battery is 

dead will cause its date and time settings to be cleared. You will have to re-
configure the settings after power is restored.

• See page 167 for information about battery life and memory capacity.

• When you do not need to use the flash, select ? (flash off) for the flash setting 

(page 28).

• Enable the Auto Power Off and the Sleep features to protect against wasting 

battery power when you forget to turn off the camera (pages 132, 132).

The first time you load a battery into the camera, a 
screen appears for configuring the display language, 
date, and time settings. Failure to set the date and 
time correctly will cause the wrong date and time data 
to be recorded with images.

Use [8], [2], [4], and [6] to select the language you want and then 
press [SET].

Use [8], [2], [4], and [6] to select the area 
where you will be using the camera and then 
press [SET].

The selected area is highlighted in red.

High

Low

*

*

*

Cyan

*

Amber

*

Red

*

Red

=4?

=8?

=2?

=6?

[SET]

[ON/OFF]

[BS]