Casio EX-Z250 Manuale Utente
133
Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * REC/PLAY
• With “Power On/Off”, the camera turns off when you press [
r
] (REC) in the REC
mode or [
p
] (PLAY) in the PLAY mode.
• Change this setting to anything besides “Disable” before connecting to a TV for
image viewing.
Procedure
[MENU] * Set Up Tab * USB
You can use the procedure below to select the USB communication protocol, which is
used when exchanging data with a computer, printer, or other external device.
used when exchanging data with a computer, printer, or other external device.
Configuring [r] and [p] Settings (REC/PLAY)
Power On
Camera turns on whenever [
r
] (REC) or [
p
] (PLAY) is
pressed.
Power On/Off
Camera turns on or off whenever [
r
] (REC) or [
p
] (PLAY)
is pressed.
Disable
Camera does not turn on or off whenever [
r
] (REC) or [
p
]
(PLAY) is pressed.
Configuring USB Protocol Settings (USB)
Mass
Storage
Storage
Select this setting when connecting to a computer (pages 109,
118). With this setting, the computer sees the camera as an
external storage device. Use this setting for normal transfer of
images from the camera to a computer (using the bundled Photo
Loader with HOT ALBUM application).
118). With this setting, the computer sees the camera as an
external storage device. Use this setting for normal transfer of
images from the camera to a computer (using the bundled Photo
Loader with HOT ALBUM application).
PTP
(PictBridge)
(PictBridge)
Select this setting when connecting to a printer that supports
PictBridge (page 102). This setting simplifies the transfer of image
data to the connected device.
PictBridge (page 102). This setting simplifies the transfer of image
data to the connected device.