Kidde KN-COSM-B Dépliant

The Kidde 900-0102 Combination Carbon Monoxide & Smoke
Alarm provides two important safety devices in a single unit. This
alarm includes a voice warning system that announces “Fire, Carbon
Monoxide, Low Battery or Smart Hush

TM

Activation”. The voice alarm

eliminates any confusion and clearly warns you and your 
family of a smoke or carbon monoxide danger, or if your battery is in
need of replacement. This technically advanced combination alarm is
battery operated protecting you and your family even during a
power outage when many incidences occur. The 900-0102 is an easy
to install alarm that is suitable for all living areas and has a 5 year
limited warranty.

Fire: The red LED will flash and be accompanied by three long
alarm beeps followed by a verbal warning message “FIRE! FIRE!”.
The alarm will repeat pattern until smoke is eliminated.

Carbon Monoxide: Four short alarm beeps followed by a verbal
warning “WARNING! CARBON MONOXIDE!” This continues until
the unit is reset or the CO is eliminated.

Low Battery: One chirp followed by warning “LOW BATTERY”.
The red LED light will flash. This pattern will continue every minute
for the first hour. After the first hour the red LED light will flash
once every minute accompanied by the chirp sound. The “LOW
BATTERY” warning will only sound once every fifteen minutes.

Voice Hush Indication: “HUSH ACTIVATED” and “HUSH 
CANCELLED” voice announcement. 

Peak Level Memory: If the alarm had detected a CO level of
100ppm or higher, the unit will announce “CO PREVIOUSLY
DETECTED” to warn of the CO incident, when the Test/Reset but-
ton is pressed.

• Talking Alarm – Announces the hazard type detected thereby 

helping to speed up the correct reaction to the hazard detected. 
Alarm announces “Fire Fire” when a smoke or fire hazard is detected 
and announces “Warning Carbon Monoxide” when a CO hazard is 
detected.

• Combined Carbon Monoxide and Smoke Alarm – A single unit 

can be installed where previously, two were needed. Reduces 
installation time and helps to keep home décor attractive.

• Test/Reset Button – Tests alarm circuitry and triggers the voice 

announcement.

• LEDs – Two LEDs are provided. Flashing green for normal operation 

and flashing red for alarm condition.

• Low Battery Warning – The unit warns of a low battery condition 

by announcing “low battery” and by initiating an alarm chirp and 
activating a flashing red LED.

• Battery Powered – Provides protection even during power outages 

when many fire and carbon monoxide incidents occur.

• Battery Safeguard – Ensures the unit cannot be accidentally 

mounted without batteries installed.

Announces the hazard type detected.

Tests alarm circuitry and triggers the voice announcement.

A single unit can be installed where previously, two were needed.
Reduces installation time and helps to keep home décor attractive.

Two LEDs are provided. Flashing green for normal operation
and flashing red for alarm condition.