Argus Camera DC1500N Manuale Utente

 
CAUTION – To avoid battery leakage 

• 

Non-rechargeable batteries are not to be recharged 

• 

Be sure to insert batteries in correct orientation 

• 

Remove batteries from the camera before extended storage 

• 

Always remove old or dead batteries from the camera 

• 

Do not short-circuit the power supply terminals 

• 

Check that the contact surfaces are clean and bright before installing 
batteries 

 

If at anytime the frame counter information begins to flash in the LCD panel, the 
battery level is low. Download your photos to the computer and replace the 
batteries immediately. 
 
 

Press Mode button to power on the camera. Two short beeps will sound. 

 

(meaning High Resolution) will appear momentarily before 

 (frame counter) 

is shown on the LCD panel, indicating that a maximum of 20 photos can be taken 
with high resolution.  

To power off the camera, press Mode button repeatedly until “oF” displays on the 
LCD panel. Then press Shutter button. 
 

Auto Power Off 
With the camera on, if there is no operation for 30 seconds, the camera 
will automatically be turned off. 

 
 

The camera is defaulted to High Resolution (CIF) mode 

.  

To select low resolution (QCIF): 

1. Press 

Mode button repeatedly until 

 is shown on the LCD panel. 

2. Press 

Shutter button to confirm your selection and “80” will appear on the 

LCD panel, indicating that a maximum of 80 photos can be taken with low 
resolution. 

 
NOTE:  After taking a few photos of low resolution, if you want to switch back to 

high resolution: (1) Press Mode button until 

 appears on the LCD panel (2) 

 

6