Argus Camera DCM-099 Manuale Utente

9

This is the default mode when you turn on the camera.  

Press the shutter button.  You will hear a beep and camera 

takes a photo.  The number displayed on the LCD screen will 

decrease by one.  If the brightness is too low, the camera will 

beeps twice indicating insufficient lighting.

The camera goes into sleep mode automatically after 30 

seconds of inactivity.  If it is not connected to a computer via 

the USB cable, you can manually turn it to sleep mode by 

pressing the MODE button until “      ” is shown on the LCD 

screen.  Press the shutter button to confirm.

Press the MODE button until the LCD screen displays “       .”   

Press the shutter button and the camera counts down for 10 

sec. followed by short beep then gives off a long beep before 

taking a photo.