Fujitsu C150-E049-02EN Manuale Utente

5-4

M3099GX/GH OEM Manual

Table 5.1 Device and operator actions for temporary errors (continued)

Scanner actions

Action to recover

LCD display

PRINT
HEAD
NOT SET

PRINT
HEAD
ALARM

- Print head is not set.
- “Temporary Error” is returned

to the host computer and an
error message is displayed on
the LCD display.

- Print head is not set correctly

or does not work well.

- “Temporary Error” is

returned to the host compu-
ter and an error message is
displayed on the LCD
display.

- Press “STOP” to reset

the error and set the
print head again.

- Press “STOP” to reset

the error and set the
print head again.

- If the error message is

displayed on the LCD
display again, change
the print head.

Table 5.2 lists the scanner and operator actions for equipment errors.

Table 5.2 Device and operator actions for equipment errors

LCD display

Scanner actions

Action to recover

- The Check lamp lights and an

error message is displayed on
the LCD display.

- The mechanism system is

stopped.

- The Check lamp lights and an

error message is displayed on
the LCD display.

- The mechanism system is

stopped.

- Check if the

lamp or heater is
attached
correctly.
Replace lamp
according to the
replacement
method.

- If turning the

power on again
does not recover
the scanner,
contact the
maintenance
personal.

HOPPER
ALARM

TRANS-
PORT
ALARM

Device and
Operator Actions
for Equipment
Errors

#05 Chapter 5

98.2.22, 1:51 PM