Canon IP3500 Manuale Utente

Routine Maintenance

This section explains the way to confirm the ink status and the procedure to replace ink tanks. 
When ink runs out or other errors occur, the ALARM lamp flashes orange to inform you of the error. 
See “ALARM Lamp Flashes Orange” on page 64 and confirm how to handle it. When printing from 
your computer, error messages appear on your computer screen as well.

„

You can confirm the status of ink tanks in the following two ways:
z

“With the Ink Lamps” on page 23

z

“With the Computer Screen” on page 24

z

You can confirm the status of each ink tank by the ink lamps. Open the Top Cover of the printer 
to confirm how the ink lamps light or flash.
z

The ink tank is correctly set and there is enough ink remaining to print.

z

......Repeats

Ink is low. You can continue printing for a while, but we recommend you to have a new ink 
tank available.
Flashing quickly (at around 1-second intervals)

......Repeats

The ink tank is inserted in the wrong position or it is empty. Ensure that the ink tank is in the 
correct position as directed by the label on the Print Head Holder. If the position is correct and 
its lamp flashes, it is empty. Replace it with a new one. 

z

The tank is not set properly. Press the 

 mark on the ink tank until the tank clicks into place. 

If it does not click into place, make sure that all packaging material is peeled off the ink tank. 
See “Prepare the replacement tank.” on page 26. If the lamps are still off after reinserting the 
ink tanks, there has been an error and the printer cannot print.

z

Be sure to install the ink tanks in the correct order indicated by the label on the Print Head Holder. The 

printer will not print if an ink tank is installed in the incorrect position.

z

For information on the compatible ink tanks, refer to the back cover of this guide.

z

If printing becomes faint or white streaks appear despite sufficient ink levels, see “When Printing 

Becomes Faint or Colors Are Incorrect” on page 29.