Nikon D2x Manuale Utente

This option can be used to enable the shutter 
re lease when no memory card is inserted in the 
cam era.  Note that when photographs are being 
cap tured to a computer using Nikon Capture 4 
Cam era Control, pho to graphs are not recorded to 
the cam era mem o ry card and the shutter release 
will be en abled re gard less of the setting chosen 
for this option.

Highlight f7 No CF card? in the second level of the CSM menu (

 178) and 

press the multi selector to the right.  Press the multi selector up or down to 
highlight an option, then press to the right to make a selection.

Shutter-release button enabled even when no memory card is inserted.

(default) Shutter-release button disabled when no memory card is inserted.

This option allows adjustments that are normally 
made by holding a button and rotating a com-
mand dial to be made by rotating the command 
dial after the button is released.  Highlight f6 But-
tons and dials in the second level of the CSM 
menu (

 178) and press the multi selector to the 

right.  Press the multi selector up or down to highlight an option, then press 
to the right to make a selection.

Default
(default)

Changes to settings made by rotating command dial while button is held 
down.

Settings can be changed by rotating command dial after button is released.  
To exit, press button again, press shutter-release button halfway, press 

, 

, 

, 

, ISO, QUAL, or WB button, or (except when No limit is select-

ed for Custom Setting c3 or optional adapter is used) wait for about 20 s.