Panasonic AG-HPX172EN Manuale Utente
88
1 Focus control display
Displays the focus control information with
99-00.
In the auto focus mode, AF appears. In the
manual focus mode, MF appears, and when
MF ASSIST is set to ON on the setting menu
SW MODE screen, MA appears. When the
display is set to macro control, the black and
white of AF or MF are displayed in reverse.
95 (Distance to the subject: infinity)
:
00 (Distance to the subject: approx. 5 cm)
Depending on the zoom position, the macro
range may not be enabled. Also, depending
on the zoom position, the lower limit value of
macro range may be different.
The units can be switched between feet and
m in the ZOOM•FOCUS option of the setting
menu DISPLAY SETUP screen.
99-00.
In the auto focus mode, AF appears. In the
manual focus mode, MF appears, and when
MF ASSIST is set to ON on the setting menu
SW MODE screen, MA appears. When the
display is set to macro control, the black and
white of AF or MF are displayed in reverse.
95 (Distance to the subject: infinity)
:
00 (Distance to the subject: approx. 5 cm)
Depending on the zoom position, the macro
range may not be enabled. Also, depending
on the zoom position, the lower limit value of
macro range may be different.
The units can be switched between feet and
m in the ZOOM•FOCUS option of the setting
menu DISPLAY SETUP screen.
TEXT MEMO and SHOT MARK display
This display lights when the USER button to
which the TEXT MEMO function has already
been allocated is pressed while recording or
playback and the text memo is recorded.
which the TEXT MEMO function has already
been allocated is pressed while recording or
playback and the text memo is recorded.
MARK ON appears when the USER button to
which the SHOT MARK function has already
been allocated is pressed while recording
and a shot mark is added to the clip being
recorded. Pressing the USER button again
deletes the shot mark, and MARK OFF
appears.
INVALID appears when text memo could not
be recorded, or when a shot mark could not
be added or deleted.
which the SHOT MARK function has already
been allocated is pressed while recording
and a shot mark is added to the clip being
recorded. Pressing the USER button again
deletes the shot mark, and MARK OFF
appears.
INVALID appears when text memo could not
be recorded, or when a shot mark could not
be added or deleted.
23 Recommended ND filter
The recommended ND filter under the current
shooting conditions is displayed here.
shooting conditions is displayed here.
24 ND filter display
ND filter selected is displayed.
5 Gain display
In CAM mode, displays the gain value of the
image amplifier configured. (During the auto
mode, AGC is displayed.)
Only in the 576i DV format, the gain value
during shooting is also displayed during
playback when ON was selected under
CAMERA DATA of the setting menu DISPLAY
SETUP screen.
image amplifier configured. (During the auto
mode, AGC is displayed.)
Only in the 576i DV format, the gain value
during shooting is also displayed during
playback when ON was selected under
CAMERA DATA of the setting menu DISPLAY
SETUP screen.
6 AWB operation display
The white balance operation is indicated here.
•
•
7 AWB information display
Displays the information of white balance.
ATW: When ATW is set
P3.2K/P5.6K: In the case of preset
Ach/Bch: In the case of A/B
LOCK: When ATW is locked
ATW: When ATW is set
P3.2K/P5.6K: In the case of preset
Ach/Bch: In the case of A/B
LOCK: When ATW is locked
28 Digital zoom display
Shows the digital zoom ratio.
D X: 2x
D 5X: 5x
D 10X: 10x
D X: 2x
D 5X: 5x
D 10X: 10x
9 Displays marker
During shooting, pressing the ZEBRA button
once or twice will display the marker.
once or twice will display the marker.
30 Optical Image Stabilizer (
) display
In CAM mode,
appears when images were
shot in the optical image stabilization mode.
Only in the 576i DV format,
Only in the 576i DV format,
also appears in
playback mode when ON was selected under
CAMERA DATA of the setting menu DISPLAY
SETUP screen and images were shot in the
optical image stabilization mode.
CAMERA DATA of the setting menu DISPLAY
SETUP screen and images were shot in the
optical image stabilization mode.
31 Scene file name display (in CAM mode)
(Page 5)
Remaining battery charge
As the remaining battery charge drops, the
display changes as follows:
display changes as follows:
When the battery has completely discharged,
(
) blinks.
(When the AC adapter is being used, a display
other than
other than
may appear: this is not a sign
of malfunctioning.)
Media remaining memory display
Displays the remaining time.
In P2 CARD REMAIN on the setting menu
DISPLAY SETUP screen, select TOTAL to
display total remaining time for all inserted
cards or ONE-CARD (highlighted) to display
the time remaining only on the card selected
for recording. During MODE CHECK, it is
possible to confirm the remaining time for the
setting not selected in the menu.
No indication is made while the remaining
time is being calculated.
An ongoing loop recording is indicated as
“LOOP” and in MODE CHECK, the standard
recording time appears after loop recording
ends.
The remaining time indication starts to flash
when a total of less than 2 minutes remains.
DISPLAY SETUP screen, select TOTAL to
display total remaining time for all inserted
cards or ONE-CARD (highlighted) to display
the time remaining only on the card selected
for recording. During MODE CHECK, it is
possible to confirm the remaining time for the
setting not selected in the menu.
No indication is made while the remaining
time is being calculated.
An ongoing loop recording is indicated as
“LOOP” and in MODE CHECK, the standard
recording time appears after loop recording
ends.
The remaining time indication starts to flash
when a total of less than 2 minutes remains.
•
•
•
•
Screen displays (continued)