Panasonic SDR-S26P Manuale Utente

Pagina di 116
96
LSQT1488
Even if an SD card is 
formatted, it cannot be 
used.
≥ Either this unit or the SD card may be damaged. Please 
contact consumer support (l 111, 112).
≥ Use an SD card from 8 MB to 32 GB with this unit. (
l 20)
The indication 
disappears.
The screen is frozen.
No operation can be 
performed.
≥ No operation can be performed on this unit when it is 
connected to a PC.
≥ Turn off the power to this unit. If the power cannot be turned 
off, remove the battery or AC adaptor and then reconnect it. 
Turn on the power again. If normal operation is still not 
restored, detach the power connected, and contact 
consumer support. (l 111, 112)
“ERROR OCCURRED. 
PLEASE TURN UNIT OFF, 
THEN TURN ON AGAIN.” 
is displayed.
≥ The unit has automatically detected an error. Restart the 
unit by turning off and on the power.
≥ The power will be turned off in about 1 minute if the power 
is not turned off and on.
≥ Repair is needed if it is repeatedly displayed even if it is 
restarted. Detach the power connected, and contact 
consumer support. (l 111, 112) Do not attempt to repair 
the unit by yourself.
When the SD card is 
inserted in this unit, it is 
not recognized.
≥ Use this unit to format SD cards. Please be aware that if an 
SD card is formatted, then all the data recorded on the card 
will be erased. (l 63)
When the SD card is 
inserted in another 
device, it is not 
recognized.
≥ Check that the device is compatible with the capacity or 
type of SD card (SD Memory Card/SDHC Memory Card) 
that you inserted. Refer to the operating instructions of the 
device for details.
Problem
Check points
SDR-S26P_PC-LSQT1488_mst.book  96 ページ  2009年2月6日 金曜日 午後4時0分