Panasonic VQT5G33 Manuale Utente
- 116 -
Others
•
Is the ISO sensitivity high or the shutter speed slow?
(ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures
indoors etc. noise will appear.)
> Decrease the ISO sensitivity.
(ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures
indoors etc. noise will appear.)
> Decrease the ISO sensitivity.
> Take pictures in bright places.
•
Have you set [High Sens.] in Scene Mode, or [Burst] in [Rec] menu to [
]?
If so, the resolution of the recorded picture decreases slightly because of high sensitivity processing,
but this is not a malfunction.
but this is not a malfunction.
•
When recording under fluorescent or LED lighting fixture etc., increasing the shutter speed may
introduce slight changes to brightness and colour. These are a result of the characteristics of the
light source and do not indicate a malfunction.
introduce slight changes to brightness and colour. These are a result of the characteristics of the
light source and do not indicate a malfunction.
•
Use a card with SD Speed Class with “Class 6” or higher when recording motion pictures.
•
Depending on the type of the card, recording may stop in the middle.
> If motion picture recording stops during use of a card of at least “Class 6” or if you use a card that
> If motion picture recording stops during use of a card of at least “Class 6” or if you use a card that
has been formatted on a PC or other equipment, the data-writing speed is lower. In such cases,
we recommend that you make a backup of the data and then format
we recommend that you make a backup of the data and then format
the card in this unit.
•
Set the AF area to the distinctive colour of the subject if there is a part that is different from the
surrounding colour.
surrounding colour.
The recorded picture looks rough.
Noise appears on the picture.
Noise appears on the picture.
The brightness or the hue of the recorded picture is different from the actual scene.
When recording pictures or half-pressing the shutter button, reddish stripes may
appear on the monitor. Alternatively, part or all of the monitor may turn a reddish
colour.
appear on the monitor. Alternatively, part or all of the monitor may turn a reddish
colour.
•
This is a characteristic of CCDs, and it appears when the subject has a bright
part. Some unevenness may occur in the surrounding areas, but this is not a
malfunction.
It is recorded in motion pictures but is not recorded on still pictures.
part. Some unevenness may occur in the surrounding areas, but this is not a
malfunction.
It is recorded in motion pictures but is not recorded on still pictures.
•
It is recommended that when you take pictures you take care not to expose
the screen to sunlight or any other source of strong light.
the screen to sunlight or any other source of strong light.
Motion picture recording stops in the middle.
Subject cannot be locked.
(AF tracking not possible)
(AF tracking not possible)