Panasonic VQT3R48 Manuale Utente
- 115 -
Recording
∫ Changing position and size of the AF area (Only when [Ø] is selected)
If you performing any of the following operations, the screen will switch to the settings
menu.
•
If you performing any of the following operations, the screen will switch to the settings
menu.
•
When [Ø] is selected, press [FOCUS].
•
From the menu screen, select [Ø], and press
1
.
•
From the Quick Menu screen, when [Ø] is selected, press [DISPLAY].
1
Press
3/4/2/1 to move the AF area.
•
You can set to arbitrary position of the screen. (It cannot be set to edge
of the screen)
of the screen)
•
After moving the AF area, press [DISPLAY] to return it to the center.
2
Rotate the rear dial to change the size of AF area.
Rear dial right: Enlarge
Rear dial left: Shrink
•
Rear dial right: Enlarge
Rear dial left: Shrink
•
It can be changed to 4 different sizes.
3
Press [MENU/SET] to set.
Note
•
AF area cannot be moved during motion picture recording.
•
The spot metering target can also be moved to match the AF area when using [Ù].
•
Position of the AF area will return to initial state when the camera is set to Intelligent Auto
Mode, when the Sleep Mode is activated, or when this unit is turned off.
Mode, when the Sleep Mode is activated, or when this unit is turned off.
•
In the following cases, the AF area and size will be center, large, and not your adjusted values.
–
During Digital Zoom
–
When it is hard to focus due to darkness
Applicable modes:
As long as the camera is held steady, the camera will automatically adjust the focus and
focus adjustment will then be quicker when the shutter is pressed. This is useful when you
do not want to miss a picture-taking opportunity.
focus adjustment will then be quicker when the shutter is pressed. This is useful when you
do not want to miss a picture-taking opportunity.
[OFF]/[ON]
Note
•
The battery will be consumed faster than usual.
•
Press the shutter button halfway again when it is difficult to focus on the subject.
•
It does not operate during AF tracking.
•
You cannot set [QUICK AF] in the following cases.
–
In [PANNING], [STARRY SKY] and [FIREWORKS] in Scene Mode
–
When using Manual Focus
[QUICK AF]