Panasonic DMC-TZ50 Manuale Utente

60   

VQT1U22

VQT1U22

   61

Single-area-focusing (High 
speed)/ Single-area-focusing:
Focuses on AF area in center 
of picture.
(Recommended for when 
focus is difficult to align) 

Spot-focusing:
Focuses on smaller, limited 
area.

AF area

Spot AF 
area

 When  using 

 or 

, picture may freeze momentarily before focus is aligned.

 AF area becomes larger in dark locations or when using digital zoom, etc.
 Use 

 or 

 if focus is difficult to align with 

.

 Cannot set to ‘Face detection’ in the following cases.

  ‘NIGHT SCENERY’, ‘FOOD’, ‘STARRY SKY’, ‘FIREWORKS’, ‘AERIAL PHOTO’, 

‘UNDERWATER’ scene modes, 

(MOTION PICTURE mode)

 If the camera detects faces in non-human subjects, switch the AF mode setting to any 

mode other than ‘face detection’.

 The face detection function may fail to work under the following conditions. (AF mode 

setting is switched to

)

Applications
(Record)

10

•  

When the face is not facing the camera or 
at an angle

•  

When the facial features are hidden 
behind sunglasses, etc.

•  

When the face is extremely bright or dark

•  

When the face appears small on the 
screen

•  

When there is rapid movement

•  

When the camera is shaking

•  

When the subject is other than a 
human being such as pets

•  

When digital zoom is used

Focus is continually aligned according to movement of subject even when shutter button 
is not pressed. (Increases battery consumption)

(

 displayed on screen)

 Focus alignment may take time if zoom is suddenly changed from max. W to max. T, or 

if suddenly moving closer to subject.

 Press shutter button halfway if focus is difficult to align.
 When  using 

, 

, or 

 ‘AF MODE’, focus will be aligned quickly when shutter 

button is pressed halfway.

Enables a rapid succession of photographs to be taken. Succession of photographs taken 
while shutter button is held down.

No burst

2.5 pictures/sec.

 Fine: Max. 3
 Standard: Max. 5

Approx. 2 

pictures/sec

Until card/built-in memory is full

 :  When using self-timer: Fixed at 3 pictures

 :  Becomes progressively slower. (Delayed timing depends on card type, PICTURE SIZE, and 

QUALITY.)

 Focus is fixed from first picture.
 When 

(Burst) is selected, the exposure and white balance are fixed to the settings 

for the first picture.

 When 

 is selected, exposure and white balance is adjusted for each picture.

 Burst speed may be reduced if ‘SENSITIVITY’ is set to high, or if shutter speed is 

reduced in darker locations.

 When burst setting is use, flash is prevented from operating, and auto bracket setting is 

canceled.

 Settings will be stored even if power is turned off.
 When using BURST while following a moving subject in locations with major differences 

in brightness (e.g. indoor to outdoor), exposure stabilization may require a little time, 
and optimal exposure may not be achieved.

 Auto review performed regardless of ‘AUTO REVIEW’ setting.
 Using the ‘HI-SPEED BURST’ scene mode allows a faster succession of photographs 

to be taken (P.49).

Automatically adjusts contrast and exposure to give more lifelike colors when there is 
significant contrast between background and subject.

(

displayed on screen)

 When set to ‘ON’, ‘SENSITIVITY’ of ‘100’ becomes ‘AUTO’.
 Correction effects may not be achieved under certain conditions.