Panasonic AG-HPX370P Manuale Utente
![Panasonic](https://files.manualsbrain.com/attachments/8f677e63fb64cbb6c62d09e6242996e7631380a8/common/fit/150/50/34d700d3fb727c767799b2da5cc474b219c0a4312e9e3044c99491a2fb9a/brand_logo.png)
149
Chapter
8
Connecting
to
Exter
nal
De
vices
De
vices
Chapter 8
Connecting to External Devices
Functionality Provided by Connections to USB 2.0 Connector
Connecting to a computer in USB
device mode
device mode
A USB 2.0 connection to a computer or other device allows
you to use P2 cards in the camera as mass storage.
you to use P2 cards in the camera as mass storage.
Procedures for making connections to a
computer
computer
1
ConnectaUSBcabletotheUSB.0connector.
NOTE
• A USB 2.0 cable is not supplied with the AG-
HPX370P/AG-HPX371E. Use a commercially available
USB cable (with shielding or other noise-reduction
measures) that supports USB 2.0.
USB cable (with shielding or other noise-reduction
measures) that supports USB 2.0.
• The camera supports USB cable lengths up to 5
meters. However, we recommend use of a USB cable
shorter than 3 meters.
shorter than 3 meters.
USB.0Connector(DEVICE)
2
SetthemenuoptionPCMODESELECTinthe
SYSTEMSETUPscreentoUSBDEVICEand
setPCMODEtoON.
SYSTEMSETUPscreentoUSBDEVICEand
setPCMODEtoON.
For details on menu operation, refer to [Using the
menus] (page 129).
menus] (page 129).
PUSH MENU TO EXIT
REC SIGNAL
REC FORMAT
CAMERA MODE
SCAN REVERSE
ASPECT CONV
SETUP
1080-59.94i
CAMERA
AVC-I100/60i
60i
OFF
PC MODE SELECT
USB DEVICE
SIDE CROP
0%
SYSTEM MODE
SYSTEM SETUP
NOTE
You can use the menu option USER MAIN/USER1/
USER2 in the SW MODE screen to assign PC MODE
settings to a user button.
Note that the USER button functions are not available
when the menu is open.
USER2 in the SW MODE screen to assign PC MODE
settings to a user button.
Note that the USER button functions are not available
when the menu is open.
To make a USB connection, you must first install the P2
software on the supplied CD-ROM on the computer. Select
the “AG-HPX370” driver. This USB driver supports only
the Windows operating system. For details, refer to the
installation manual.
software on the supplied CD-ROM on the computer. Select
the “AG-HPX370” driver. This USB driver supports only
the Windows operating system. For details, refer to the
installation manual.
NOTE
• A USB driver must be installed on the computer.
• Use a computer that supports USB 2.0 since the camera
• Use a computer that supports USB 2.0 since the camera
supports only USB 2.0.
• Connect only one camera to a computer via USB.
• Do not remove P2 cards when the camera is connect to a
• Do not remove P2 cards when the camera is connect to a
computer via USB.
• In a USB connection, the P2 CARD ACCESS LED is on only
when the card is accessed.
• In USB device operation, recording, playback and clip
thumbnail operations are not available.
• When a USB device is running, the remaining capacity of P2
cards is not indicated. Audio is not output through the SDI
OUT or DVCPRO/DV connector and the AUDIO level meters
do not appear.
OUT or DVCPRO/DV connector and the AUDIO level meters
do not appear.
• The USB lamp on the camera lights during USB
connection and USB DEVICE CONNECT appears in the
center of the viewfinder. If a normal connection cannot
be established, the USB lamp blinks and DISCONNECT
appears in the viewfinder.
center of the viewfinder. If a normal connection cannot
be established, the USB lamp blinks and DISCONNECT
appears in the viewfinder.
USBLED
(Viewfinderdisplay)
USB DEVICE
CONNECT