Panasonic DMC-LX100 Manuale Utente

Pagina di 332
311
SQW0021
Others
Q&A  Troubleshooting
 
Recording
Cannot record pictures.
 •Card is full.
→  Free space by deleting unwanted pictures 
.
 •When a large capacity card is used, you may not be able to take a picture for a while after you turn 
on the camera.
 •Focus is not aligned.
→  When [Focus/Release Priority] is set to [FOCUS], the camera will not record until proper 
focusing is achieved. 
Recorded pictures look white.
 •Lens is dirty (fingerprints, etc.).
→  Turn the camera on to extract lens barrel, and clean lens surface with a soft, dry cloth. 
 •Lens is foggy 
.
Recorded pictures are too bright/too dark.
 •Adjust the exposure 
.
 •AE Lock 
 is set inappropriately.
Zooming stops instantaneously.
 •When using the Extended optical zoom, the zooming action will stop temporarily. This is not a 
malfunction.
Some pictures are taken when I press the shutter button just once.
 •Camera is set to use [Auto Bracket], White Balance Bracket, [Aspect Bracket], or [Burst]. Self-
Timer is set to [   ].
→  Clear the setting. 
Unable to perform bracket recording.
 •The remaining memory space in the card is low.
→  Check the remaining memory space in the card.
Focus not aligned correctly.
 •Subject outside of focus range. 
 •Caused by jitter or subject movement. 
 •[Focus/Release Priority] is set to [RELEASE]. 
 •[Shutter AF] is set to [OFF]. 
 •AF Lock 
 is set inappropriately.
Recorded pictures are blurred. The stabilizer function ineffective.
 •Shutter speed is slower in dark locations and the stabilizer function is less effective.
→  Hold camera firmly with both hands, keeping arms close to body.
 •Use a tripod and the self-timer when using a slower shutter speed 
.