Panasonic PV-DV103 Manuale Utente

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com

PC Connection

To PC Connector

PHOTOVU LINK Driver (Optional)

System Requirements for PHOTOVU LINK Driver (Optional)

• IBM PC/AT or compatible
• Intel

Pentium

Processor

• Microsoft Windows

98/98SE/ME/2000/XP

• RAM: 16 MB or more
• 2 MB minimum available hard disk space
• 256 color monitor (full color recommended)

• 3.5 inch 1.44 MB floppy disk drive

(for installation)

• RS-232C serial port (D-Sub 9-pin)

An adaptor (D-Sub 9-pin male to a
D-Sub female) is required for a
D-Sub 25-pin

• Mouse or other pointing device

RS-232C Serial port
(D-Sub 9-pin)
(Default is COM1.)

PC Connecting Cable for Windows
(optional: PC Connection Unit (PV-DRS2A, p. 51))

An image recorded on the DV Tape can be transferred to your PC (Personal Computer).

Connection

Turn off your PC.

Connect the Palmcorder to your PC (Windows) using the PC connecting cable
(optional: PC Connection Unit (PV-DRS2A, p. 51)).
• Before connecting the Palmcorder to the PC, make sure the PC

power is off to insure that images are transferred properly.

Turn on your PC.

Set the Palmcorder POWER to VCR.

• For extended periods of use, it is recommended to use the AC Adaptor as a power

source.

• Refer to PC or Windows manual to identify which COM port is to be used for connection.

Note

*Satisfy the conditions recommended by Microsoft for Windows.

DV103.p47-50.p65

2003/10/01, 14:12