Sharp VL-WD255U Manuale Utente

The time code shows the hour, minute and
second of recording, and the frame number
(1 frame = approx. 1/30 sec.). This is automati-
cally recorded along with the subject when you
are recording on the tape. You can display the
time code on the screen as an accurate
counter in both TAPE-VCR and TAPE-CAMERA
modes.

Frame number*

• The example screens for this feature are for

TAPE-VCR mode.

During playback or camera recording in
TAPE modes, press the MENU/
DISPLAY button until the menu screen
appears.

Select 

I

, then press 

r

 on the

Operation button. Select “TIME CODE”
(

1

), then press 

r

 (

2

).

Press 

d

 or 

y

 to select “DISP. ON”,

then press 

e

.

Press the MENU/DISPLAY button to
turn off the menu screen.

• The time code appears.

Select “DISP. OFF” in step 3 above.

• When the tape reaches an unrecorded section,

the time code returns to zero (TC0:00:00). Once
recorded, the time code cannot be changed.

In TAPE-VCR mode, select 

I

, then

press 

r

 on the Operation button.

Select “TC OUT” (

1

), then press 

r

(

2

).

Press 

d

 or 

y

 to select “ON”, then

press 

e

.

Second

Minute

Hour

* Displayed during still

or frame advance
playback.

Time code