Manualsbrain.com
  1. Manuali
  2. Marche
  3. Sony
  4. HDR-XR100
  5. Manuale Utente

Sony HDR-XR100 Manuale Utente

Scarica
Pagina di 133
109
Table of C
on
ten
ts
U
seful R
ec
or
ding 
Techniques
Inde
x
The imaging field looks different.
The imaging field may look different 
depending on the condition of your 
camcorder. This is not a malfunction.
The flash does not work (HDR-XR200/
XR200V).
You cannot record with the flash when 
capturing photos while shooting a movie.
Even if auto flash or   (Auto redeye 
reduction) is selected, you cannot use the 
flash with:
NightShot
[SPOT MTR/FCS]
[MANUAL] in [EXPOSURE]
[SPOT METER]
[TWILIGHT], [CANDLE], 
[SUNRISE&SUNSET], [FIREWORKS], 
[LANDSCAPE], [SPOTLIGHT], [BEACH] or 
[SNOW] in [SCENE SELECTION]
The actual recording time for movies is 
less than the expected recording time of 
the recording media.
Depending on the recording conditions, the 
time available for recording may be shorter, for 
example when recording a fast moving object, 
etc. (p. 117).
The camcorder stops operating.
The temperature of your camcorder is 
extremely high. Turn off your camcorder and 
leave it for a while in a cool place.
The temperature of your camcorder is 
extremely low. Turn off your camcorder and 
take it to a warm place. Leave the camcorder 
there for a while, then turn on the camcorder.
If you keep applying vibration on the 
camcorder, recording may stop.
There is a time difference between the 
point when START/STOP is pressed and 
the point that the recording movie is 
started or stopped actually.
On your camcorder, there may be a slight 
time difference between the point where you 
press START/STOP and the actual point that 




recording movie starts/stops. This is not a 
malfunction.
The horizontal to vertical ratio of the 
movie (16:9 (wide)/4:3) cannot be 
changed.
The horizontal to vertical ratio of high 
definition image quality (HD) movies is 16:9 
(wide).
The auto focus does not function.
Set [FOCUS] to [AUTO] (p. 101).
The recording conditions are not suitable for 
auto focus. Adjust the focus manually (p. 101).
SteadyShot does not function.
For HDR-XR100/XR101
Set [ STEADYSHOT] to [ON] (p. 76).
Even if [ STEADYSHOT] is set to 
[ON], your camcorder may not be able to 
compensate for excessive vibrations.
For HDR-XR200/XR200V
Set [ STEADYSHOT] to [ACTIVE] or 
[STANDARD], [ STEADYSHOT] to [ON] 
Even if [ STEADYSHOT] is set to 
[ACTIVE] or [STANDARD], or  
[ STEADYSHOT] is set to [ON], your 
camcorder may not be able to compensate for 
excessive vibrations.
The subjects passing by the screen very 
fast appear crooked.
This is called the focal plane phenomenon. 
This is not a malfunction. Because of the way 
the image device (CMOS sensor) reads out 
image signals, the subjects passing by the lens 
rapidly might appear crooked depending on 
the recording conditions.
The color of the image is not correctly 
displayed (HDR-XR200/XR200V).
Press NIGHTSHOT (p. 36).