Sony HDR-HC5 Manuale
86
You cannot dub correctly using the
A/V connecting cable.
A/V connecting cable.
• You cannot input externally from a device
connected with the A/V connecting cable.
• The A/V connecting cable is not connected
properly.
Make sure that the A/V connecting cable is
connected to the input jack of the other
device for dubbing a picture from your
camcorder.
Make sure that the A/V connecting cable is
connected to the input jack of the other
device for dubbing a picture from your
camcorder.
When connected using an i.LINK
cable, no picture appears on the
monitor screen or the picture is
distorted during dubbing.
cable, no picture appears on the
monitor screen or the picture is
distorted during dubbing.
• Set [VCR HDV/DV] on the
• If the device to be connected is not
compatible with HDV1080i specification,
you cannot dub in HD (high definition)
image quality (p. 65). For details, refer to
the instruction manuals supplied with the
device to be connected.
you cannot dub in HD (high definition)
image quality (p. 65). For details, refer to
the instruction manuals supplied with the
device to be connected.
• Down convert the pictures recorded in
HDV format to DV format and dub in SD
(standard definition) image quality (p. 65).
(standard definition) image quality (p. 65).
You cannot add sound to the
recorded tape.
recorded tape.
• You cannot add sound to the recorded tape
on this unit.
You cannot dub correctly using the
HDMI cable.
HDMI cable.
• You cannot dub pictures using the HDMI
cable.
New sound added to a recorded tape
on another camcorder is not heard.
on another camcorder is not heard.
• Adjust [
AUDIO MIX] from the [ST1]
(original sound) side until the sound is
heard appropriately (p. 58).
heard appropriately (p. 58).
Still pictures cannot be dubbed from
a tape to a “Memory Stick Duo.”
a tape to a “Memory Stick Duo.”
• You cannot record or a distorted picture
may be recorded if the tape has been used
repeatedly for recording.
repeatedly for recording.
The computer does not recognize
your camcorder.
your camcorder.
• Install “Picture Motion Browser” (p. 74).
• Disconnect USB devices other than the
• Disconnect USB devices other than the
keyboard, the mouse, and the camcorder
from the (USB) jack on the computer.
from the (USB) jack on the computer.
• Disconnect the cable from the computer
and camcorder, restart the computer, then
connect them again correctly.
connect them again correctly.
You cannot install the supplied
software, “Picture Motion Browser,”
on a Macintosh computer.
software, “Picture Motion Browser,”
on a Macintosh computer.
• You cannot use “Picture Motion Browser”
on a Macintosh computer.
Depending on the functions, you may not
be able to use them together. The following
list shows examples of menu items and
functions that cannot be used at the same
time.
be able to use them together. The following
list shows examples of menu items and
functions that cannot be used at the same
time.
Connecting to a computer
Functions that cannot be used
together
together
Not available
If this function is set
BACK LIGHT
function
function
[FIREWORKS],
[SPOT METER],
[MANUAL] of
[EXPOSURE]
[SPOT METER],
[MANUAL] of
[EXPOSURE]
[SCENE SELECT]
NightShot, [TELE
MACRO],
[CINEMA EFECT],
[OLD MOVIE],
[COLOR SLOW S]
MACRO],
[CINEMA EFECT],
[OLD MOVIE],
[COLOR SLOW S]
[SPOT METER]
NightShot,
[CINEMA EFECT]
[CINEMA EFECT]
Troubleshooting (Continued)