Sony DCR-TRV480E Manuale Utente
Additional Information
142
3
Slide the POWER switch repeatedly to
select the PLAY/EDIT mode while
pressing DISPLAY/BATT INFO on your
camcorder, then press and hold
DISPLAY/BATT INFO for about 5
seconds.
select the PLAY/EDIT mode while
pressing DISPLAY/BATT INFO on your
camcorder, then press and hold
DISPLAY/BATT INFO for about 5
seconds.
4
Touch the “×” displayed on the screen
with an object such as the corner of a
“Memory Stick.”
The position of the “×” changes.
with an object such as the corner of a
“Memory Stick.”
The position of the “×” changes.
If you did not press the right spot, start from
step 4 again.
step 4 again.
b
Note
• You cannot calibrate the LCD screen if you have
rotated the LCD panel and set it with the LCD screen
facing out.
facing out.
On handling the casing
• If the casing is soiled, clean the camcorder
body with a soft cloth lightly moistened with
water, and then wipe the casing with a dry soft
cloth.
water, and then wipe the casing with a dry soft
cloth.
• Avoid the following to avoid damage to the
finish.
– Using chemicals such as thinner, benzine,
– Using chemicals such as thinner, benzine,
alcohol, chemical cloths, repellent and
insecticide.
insecticide.
– Handling with above substances on your
hands.
– Leaving the casing in contact with rubber or
vinyl objects for a long period of time.
About care and storage of the lens
• Wipe the surface of the lens clean with a soft
cloth in the following instances:
– When there are fingerprints on the lens
– When there are fingerprints on the lens
surface.
– In hot or humid locations
– When the lens is exposed to salty air such as
– When the lens is exposed to salty air such as
at the seaside.
• Store in a well-ventilated location subject to
little dirt or dust.
• To prevent molds periodically clean the lens
as described above.
It is recommended you operate your camcorder
about once a month to keep it in an optimum
state for a long time.
about once a month to keep it in an optimum
state for a long time.
To charge the pre-installed
rechargeable battery
rechargeable battery
Your camcorder has a pre-installed
rechargeable battery to retain the date, time, and
other settings even when the POWER switch is
set to (CHG) OFF. The pre-installed
rechargeable battery is always charged while
you are using your camcorder but it will get
discharged gradually if you do not use your
camcorder. The rechargeable battery will be
fully discharged in about 3 months if you do not
use your camcorder at all. However, even if the
pre-installed rechargeable battery is not
charged, the camcorder operation will not be
affected as long as you are not recording the
date.
rechargeable battery to retain the date, time, and
other settings even when the POWER switch is
set to (CHG) OFF. The pre-installed
rechargeable battery is always charged while
you are using your camcorder but it will get
discharged gradually if you do not use your
camcorder. The rechargeable battery will be
fully discharged in about 3 months if you do not
use your camcorder at all. However, even if the
pre-installed rechargeable battery is not
charged, the camcorder operation will not be
affected as long as you are not recording the
date.
Procedures
Connect your camcorder to a wall socket using
the supplied AC Adaptor, and leave it with the
POWER switch set to (CHG) OFF for more
than 24 hours.
Connect your camcorder to a wall socket using
the supplied AC Adaptor, and leave it with the
POWER switch set to (CHG) OFF for more
than 24 hours.
CALIBRATION