Sony DCR-IP45 Manuale
146
To prevent accidental erasure of important images, you can protect selected images.
Before operation
Insert a “Memory Stick” into your camcorder.
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY/NETWORK (DCR-IP55 only) or VCR.
(2) In MEMORY/NETWORK mode, go to step 3.
(2) In MEMORY/NETWORK mode, go to step 3.
In VCR mode, press
PB.
(3) Press INDEX on your camcorder to display the index.
(4) Press - MARK. The screen to protect the image appears.
(5) Press the image you want to protect. The “-” appears above the protected image.
(4) Press - MARK. The screen to protect the image appears.
(5) Press the image you want to protect. The “-” appears above the protected image.
To return to FN
Press EXIT.
To cancel image protection
Press the image you want to cancel image protection in step 5 again. The “-”
disappears.
disappears.
Note
Formatting erases all information on the “Memory Stick,” including the protected
image data. Check the contents of the “Memory Stick” before formatting.
Formatting erases all information on the “Memory Stick,” including the protected
image data. Check the contents of the “Memory Stick” before formatting.
If the write-protect tab on the “Memory Stick” is set to LOCK
You cannot carry out image protection.
You cannot carry out image protection.
Preventing accidental erasure
– Image protection
– Image protection
3
INDEX
4,5
1
1
2
3
4
5
6
EXIT
RET
-
MARK
1 / 40
1
2
3
4
5
6
EXIT
DEL
MARK
-
MARK
T
t
-
2 / 40
T
t
-
MARK