Hasselblad 3034216 Manuale Utente

Pagina di 62
12    
  Shooting/image storage modes
The CFV can store captured images in three ways:
1.  Untethered / Compact flash card mode
In this mode the CFV acts independently of other connections. Images are stored on the 
internal, removable compact-flash card. 
  •  The main advantage with this mode is the freedom of cables and extra equip-
ment.
  •  The main disadvantages with this mode in the field are the battery power capacity 
and the size of the card’s holding capacity.
Please note that the recommended types of CF cards are Sandisk Extreme-III or Lexar 
Professional 133x. Other cards will work but offer a reduced capture rate.
2.  Semi-tethered / Imagebank mode
This mode enables you to attach the camera to a portable Hasselblad Imagebank via a 
FireWire cable. The Imagebank features massive storage capacity and high-speed data 
transfer. It is small, lightweight, battery powered and easily clips to your belt, so the 
solution is just as portable as the untethered option. 
  •  The main advantage with this mode is the great number of images that can be 
stored without a pause.
  •  The main disadvantage with this mode is the extra equipment and cablage needed 
that might restrict mobility in some cases.
3.  Tethered / Studio mode 
This mode enables you to connect your CFV directly to a computer and to operate the sys-
tem using Hasselblad FlexColor software and store images on a computer hard-disk. 
  •  The main advantages with this mode are the almost limitless storage capacity and 
being able to work on the images (with Hasselblad FlexColor) on a large screen.
  •  The main disadvantage with this mode is the lack of mobility to any great extent.
  Selecting the current medium
A choice has to be made concerning where the captured images will initially be stored. 
The current storage medium is the location to which new shots are saved and from which 
you can browse using the navigation button. In many cases, the destination medium is 
selected automatically, for example:
  •  When you are connected to a computer, then images are always saved directly to 
the computer hard disk.
  •  When only one medium is connected (e.g., a compact-flash card), then this medium 
is automatically selected.
However, if you are working away from your computer and have several media attached 
(e.g., both a card and an Imagebank, then you may need to select a medium explicitly if 
you want to browse its contents and store images new to it.
There are two ways of selecting the current storage medium:
  •  See “Selecting the Current Storage Medium” for details.
  •  Use the zoom-out button to zoom all the way up to the top level, which shows all 
connected media, and then zoom in on the appropriate medium and batch. 
    See “Navigating Media and Batches” for more information about selecting media 
and batches in this way.