Manualsbrain.com
  1. Manuali
  2. Marche
  3. Philips
  4. BDP7500
  5. Manuale Utente

Philips BDP7500 Manuale Utente

Scarica
Pagina di 33
12
6
 
Once connected, an IP address is obtained 
automatically.
If no IP address is obtained, select 
• 
[Retry] and press OK to try to obtain 
the IP address again. 
7
 Select 
[Finish] in the menu, then press OK to 
exit.
Note
This product does not support automatic detection of an 
 
•
Ethernet crossover cable.
Loading BD-Live content from the internet may take 
 
•
some time, depending on the file size and the speed of 
the internet connection.
Use Philips EasyLink
This product supports Philips EasyLink which uses the 
HDMI CEC (Consumer Electronics Control) protocol. 
You can use one single remote control to control 
EasyLink-compliant devices that are connected 
through HDMI connectors.
Note
To enable the EasyLink feature, you must turn on the 
 
•
HDMI CEC operations on the TV and on other devices 
connected to TV. Refer to the TVs/devices manual for 
details.
One-touch play
1
 Press 
the 
STANDBY  button to turn on this 
product.
The TV (if supports one-touch play) 
 
»
automatically turns on and switches to the 
correct video-in channel.
If a disc is loaded in this product, disc play 
 
»
automatically starts.
One-touch standby
1
 
Press and hold the STANDBY  button for 
more than 3 seconds.
All the connected devices (if the device 
 
»
supports one-touch standby) automatically 
switch to standby. 
Note
Philips does not guarantee 100% interoperability with all 
 
•
HDMI CEC devices.
Select menu display language
Note
If this product is connected to a HDMI CEC compliant 
 
•
TV, skip this setting. It switches automatically to the 
same OSD menu language as per your TV setting (if the 
language set on TV is supported by this product).
1
 
In the Home menu, select [Settings] and press 
OK.
2
 Select 
[Preference Setup], then press .
3
 Select 
[Menu Language], then press  . 
  
The language options may vary from 
• 
different regions.
4
 Press   to select a language, then press OK.
Setup network
To enjoy software updates of this product and BD-
Live bonus contents for certain Blu-ray discs, set up 
the network connection.
Note
Ensure that the network cable is properly connected and 
 
•
the router is switched on. 
1
 
Connect this product to the broadband 
modem or router.
2
 
In the Home menu, select [Settings] and press 
OK.
3
 Select 
[Advanced Setup], then press  .
4
 Select 
[Network], then press OK.
5
 Select 
[Next] in the menu, then press OK.
This product starts to detect if there is a 
 
»
connection to the network.
If the connection test fails, select 
 
»
[Retry] 
and press OK to re-connect again to the 
network.
EN