Philips BDP7500 Manuale Utente

Pagina di 33
22
Update software via USB
1
 
Go to www.philips.com/support to check if 
the latest software version is available for this 
product.
2
 
Download the software onto a USB flash 
drive.
3
 
Insert a USB flash drive to the 
 (USB) jack 
on this product.
4
 
In the Home menu, select [Settings] > 
[Advanced Setup] > [Software Download] > 
[USB].
5
 
Follow the instructions on the TV screen to 
confirm update operation.
Once software update is complete, this 
 
»
product automatically turns off to standby.
6
 
Disconnect the power cord for a few seconds 
and connect again to turn on this product.
Note
Do not turn off the power or remove the USB flash 
 
drive when software updating is in progress to prevent 
possible damage of this product.
Care
Caution
Never use solvents such as benzene, thinner, cleaners 
 
available commercially, or anti-static sprays intended 
for discs.
Clean discs
Wipe the disc with a micro fibre cleaning cloth from 
the centre to the edge in a straight line movement.
Specifications
Note
Specification and design are subject to change without 
 
notice
Play media
BD-Video, DVD-Video, DVD+R/+RW, DVD-
• 
R/-RW, DVD+R/-R DL, CD-R/CD-RW, Audio 
CD, Video CD/SVCD, Picture CD, MP3-CD, 
WMA-CD, DivX (Ultra)-CD, USB flash drive.
Accessories supplied
Remote control and batteries
• 
Audio/Video cables
• 
Power cable
• 
[DivX® VOD Code]
Display the DivX® registration code.
Tip
Use this product’s DivX registration code when you rent 
 
or purchase video from www.divx.com/vod. The DivX 
videos rented or purchased through the DivX® VOD 
(Video On Demand) service can be played only on the 
device to which it is registered.
[Version Info.]
Display the software version and the MAC address 
of this product. 
Tip
This information is needed for you to check if a latest 
 
software version is available at the Philips website so that 
you can download and install on this product.
[Restore Default Settings]
Reset all the settings of this product to the factory 
settings, except for [Parental Control] setting.
7 Additional 
Information
Update software
For software updates to enchance performance, 
check the current software version of this product to 
compare with the latest software (if available) at the 
Philips website.
1
 Press .
2
 Select 
[Settings], then press OK.
3
 Select 
[Advanced Setup] > [Version Info.], 
then press OK.
Update software via network
1
 
Set up the network connection (see “Get 
started’ > “Set up network”).
2
 
In the Home menu, select [Settings] > 
[Advanced Setup] > [Software Download] > 
[Network]. 
You are prompted to start upgrading 
 
»
processs if upgrade media is detected. 
3
 
Follow the instructions on the TV screen to 
confirm update operation.
Once software update is complete, this 
 
»
product automatically turns off to standby.
4
 
Disconnect the power cord for a few seconds 
and connect again to turn on this product. 
EN