Panasonic KX-TG2388 Manuale Utente
Answering System Features
50
For assistance, please visit http://www.panasonic.com/consumersupport
If “New message” is displayed on the
handset, new messages have been
recorded.
handset, new messages have been
recorded.
L
If the Message Alert is turned on
(page 55), the Ringer/Message Alert
indicator on the handset will flash slowly
when new messages have been
recorded and the handset is not in use.
(page 55), the Ringer/Message Alert
indicator on the handset will flash slowly
when new messages have been
recorded and the handset is not in use.
1
Press {MENU}.
2
Press {Select} at “Message play”.
L
L
The unit announces the number of
new messages and only new
messages are played back from the
speaker. To switch to the receiver,
press {C}. To switch back to the
speaker, press {s}.
new messages and only new
messages are played back from the
speaker. To switch to the receiver,
press {C}. To switch back to the
speaker, press {s}.
L
When you have no new messages,
the unit announces “No new
messages. All message playback”
and plays back all messages.
the unit announces “No new
messages. All message playback”
and plays back all messages.
L
When you have no messages, the
unit announces “No messages”.
unit announces “No messages”.
L
If you do not press any button, the
voice guidance will start.
voice guidance will start.
3
Press {OFF} when finished.
Note:
L
If a call is received during playback, the
unit rings and playback stops. To answer
the call, press {C} or {s}. For
playback, start again from the beginning
after hanging up.
unit rings and playback stops. To answer
the call, press {C} or {s}. For
playback, start again from the beginning
after hanging up.
L
At the end of the last message, “End of
final message” is heard. The unit will
announce the remaining recording time
if it is less than 3 minutes.
final message” is heard. The unit will
announce the remaining recording time
if it is less than 3 minutes.
L
If you hear “Memory full” after playback,
erase unnecessary messages
(page 49).
erase unnecessary messages
(page 49).
L
When memo messages are played
(p. 51), “MEMO” is displayed.
(p. 51), “MEMO” is displayed.
To slow down the playback speed (Slow
Talk Message Playback)
Press {3} during playback.
Talk Message Playback)
Press {3} during playback.
L
To return to normal speed, press {3} on
the handset.
the handset.
L
Each time you press the button during
playback, the speed will change to slow/
normal.
playback, the speed will change to slow/
normal.
L
Playback speed will return to normal
after you finish listening to messages.
after you finish listening to messages.
Repeating a message
Press {Repeat} while listening to the
message.
Press {Repeat} while listening to the
message.
L
If pushed within the first 5 seconds of a
message, the previous message will be
played.
message, the previous message will be
played.
Skipping a message
Press {Skip} to play the next message.
Press {Skip} to play the next message.
Voice guidance
If you do not press any buttons after the
last message is played back, the unit’s
voice guidance starts. Operate the
answering system by following the
guidance as necessary.
The unit will announce “Press 4 to play
back new messages. Press 5 to play back
all messages.”
If you do not press any buttons after the
last message is played back, the unit’s
voice guidance starts. Operate the
answering system by following the
guidance as necessary.
The unit will announce “Press 4 to play
back new messages. Press 5 to play back
all messages.”
L
You can press buttons for other
playback options (page 51) even if the
voice guidance has started.
playback options (page 51) even if the
voice guidance has started.
L
If you do not press any button within 10
seconds after the voice guidance, the
handset returns to standby mode.
seconds after the voice guidance, the
handset returns to standby mode.
TG2388.book 50 ページ ２００５年７月１４日 木曜日 午後４時５８分