Panasonic KX-TVP200 Manuale Utente
D4 CUSTOMISING THE MESSAGE MANAGER’S MAILBOX
Installation Manual
303
6.
The VPS plays the current operator’s extension setting. Press [1] to change or assign the
operator’s extension. Press [2] to accept the current setting, or Press [3] to delete the
current setting—Go to Step 9.
operator’s extension. Press [2] to accept the current setting, or Press [3] to delete the
current setting—Go to Step 9.
Note
Operator 1’s extension number cannot be deleted.
Operator 1’s extension number cannot be deleted.
7.
Type the extension number.
8.
The VPS plays the current extension setting. Press [2] to accept it.
9.
Repeat Steps 6-8 to assign or to delete the extension number for the Day, Night, Lunch and
Break Modes for each operator.
Break Modes for each operator.
10.
The VPS plays the current Telephone number 1 setting. Press [1] to change the telephone
number. If a telephone number has not yet been assigned, go to Step 11. Press [2] to
accept the current setting—Go to Step 13.
accept the current setting—Go to Step 13.
11.
Type the telephone number using "0-9" and " ".
Notes
•
Please make sure you begin the telephone number with a Line Access Code
(to seize an outside [CO] line).
(to seize an outside [CO] line).
•
When connected to the KX-TD500, the maximum number of characters allowed
to be entered is 24; when connected to other types of PBX, 16.
to be entered is 24; when connected to other types of PBX, 16.
12.
The VPS plays the current Telephone number 1 setting. Press [2] to accept it.
13.
The VPS plays the current Telephone number 2 setting. Press [1] to change the telephone
number. If a telephone number has not yet been assigned, go to Step 14. Press [2] to
accept the current setting.
accept the current setting.
14.
Type the telephone number using "0-9" and " ".
15.
The VPS plays the current Telephone number 2 setting. Press [2] to accept it.