GE 2-9892 Manuale Utente

1.

Reverse the Handset Hook
Firmly slide the 

HANDSET HOOK out of

the 

CRADLE. Rotate it 180° and slide it

back into the 

CRADLE.

2.

Remove the Base Plate
For wall mount installations, press in the
two tabs and pull the 

BASE PLATE from

the back of the telephone.
Note: For future reference, please copy
your three digit security code located on
the bottom of the unit.

3.

Connect the Power Cord
Insert the right angle plug of the 

POWER

CORD into the POWER JACK on the back of
the telephone. Let the 

POWER CORD run

down the center of the telephone back.

Note: Do 

not plug POWER SUPPLY into wall

outlet until all other steps are completed.

4.

Connect the Short Telephone Line Cord
Plug either end of the 

SHORT TELEPHONE

LINE CORD into the PHONE LINE JACK on
the back of the telephone.

5.

Install the Base Plate so that the Arrows
Face Upward
Position the 

POWER CORD and the SHORT

TELEPHONE LINE CORD to run through the
top notch in the 

BASE PLATE. Feed the

SHORT TELEPHONE LINE CORD through
the large opening in the back of the 

BASE

PLATE. Snap the BASE PLATE into the lower
set of tab openings in the base of the
telephone, making sure the 

POWER CORD

runs through the bottom notch in the 

BASE

PLATE.