Phonetics 5100 Manuale Utente

116

Sensaphone

ISACC Instruction Manual

The alarm has been acknowledged and the unit will then disconnect from the telephone line.

If the touch-tone code is not received, ISACC will respond by saying:

"Have a good day."

The alarm is not acknowledged. ISACC will continue calling the next phone number. You
may call the unit back using a touch-tone telephone, PC or terminal to acknowledge the
alarm. An alarm cannot be acknowledged using a pulse (rotary) telephone.

ALARM DIALOUT - DATA MODE

When ISACC dials to a PC or terminal using its internal modem, it sends data information
indicating the alarm condition. Acknowledgment is requested at the end of the report. You
may also program ISACC to acknowledge on carrier when dialing out in data mode.

Example

: If acknowledge on carrier is selected as NO, ISACC will display the following

during a data mode alarm dialout:

ALARM DIALOUT

The time is 11:52:25 PM

the date is 12/29/93

Unit identification = Sun

Phone number of unit = 555-5674

Reason for dialout

IN02 = "HI SUMP FLOAT " = EXISTS

Acknowledge alarms (Y or N) ?

Type Y to acknowledge the alarm. Type N to leave the alarm unacknowledged. Enter your
answer. The following will then be displayed:

Stay online (Y or N)?

If you wish to stay online with ISACC to access programming and interrogate the unit, type Y.
If you do not want to stay online with ISACC, type N for NO. If you left the alarm unac-
knowledged, ISACC will then resume dialing the next phone number.