ADT Security Services 200 Plus Manuale Utente

 

 

– 10 – 

5.  If You Fumigate Your Building: The chemical fog used in the 

fumigation process may be sensed as smoke by fire alarm smoke 
detectors and may also adversely affect area sensors. Therefore, be sure 
to notify ADT BEFORE starting. 

6.  If You Change Your Telephone: Changes in the location of the 

telephone outlets or telephone numbers could compromise the 
effectiveness of your security system. Have an ADT service technician 
inspect your system immediately after any such changes. 

7.  If You Install Anything Near Any System Device: If you install any 

electrical or electronic equipment within a few feet of any element of your 
security system, it could cause the security equipment to malfunction. 
Discuss such installation plans with an ADT service technician prior to 
proceeding with the installation. 

8.  If You Remodel or Renovate Your Building: During the course of 

remodeling or renovating, there are often changes in telephone and/or 
electrical circuits. In addition, large clouds of construction dust are 
generated. Any of these can compromise the effectiveness of your security 
system. 

In addition, any change in the position of walls, or door or window 
openings may disable certain sensors in your system. A change in the 
location of mirrors, pictures, or other wall hangings, as well as fans or 
large plants, could cause a false alarm when an area sensor is activated 
by movement or reflections of movement. 

Remember to discuss any renovation or redecorating with your ADT 
representative before you start construction or redecorating, and once 
again when you complete it.