SVAT Electronics CLEARVU2 Manuale Utente

now you can see

 The DVR will record continuously during the set time. 

The DVR will record only when motion is detected during the set time.

The DVR will record continuously during the set time, but when motion is detected it will record using the frame rate 

you set in “Motion Rec Frame Rate.” This is useful if you want to save DVR storage space by setting the Timer Rec Frame 

Rate to a lower 

number and the Motion Rec Frame Rate to a higher number. When no motion is detected, the DVR will record using 

less storage space (high quality footage is not needed since there is nothing happening). When motion is detected, 

the DVR will use more space but the footage will be more fluid. Setting the record mode to Time Motion will allow you 

more hours of recording time.

The DVR will not record during the set time. 

IMPORTANT: After settings are changed and you exit the menu, press 

 to confirm your recording schedule.

Use this menu to change the way the DVR alerts 

you (audio alerts).

Press 

►/4 to turn motion alert ON/OFF. The motion alert will sound whenever motion is detected on one of your 

cameras. Motion alerts will only sound when the DVR is recording

Press 

►/4 to turn video loss alert ON/OFF. The video loss alert will sound whenever one of your cameras loses power 

or gets disconnected.

Press 

►/4 to turn HDD full alert ON/OFF. The HDD full alert will sound when the hard drive is full and you do not have 

it set to overwrite.