SVAT Electronics 2CV500 - 4CH Manuale Utente

CV500 - 4CH

To Setup your DDNS:

1.  Select to setup the DDNS.
2.  Highlight DDNS Setting. Use the mouse wheel or directional keys to change
  from  DISABLE to ENABLE.
3.  Highlight PROVIDER. Choose your DDNS provider from the list.
4.  Highlight HOST NAME. select to input your host name.
5.  Highlight USER NAME. select to input your user name.
6.  Highlight PASSWORD. select to input your password.

*See DDNS Setup for more information on the DDNS setting.

7.  Press Menu or select the to exit the DDNS SETUP Menu.
8.  Press Menu or select the to save your changes and exit the
  NETWORK SETUP Menu.

RTSP

(Real Time Streaming Protocol) Used for streaming each channel of video over
the Internet.

Note: You only need to change these settings if your

network or ISP is blocking the ports listed on

this screen.

NETWORK SETUP...continued

PPPoE SETUP

(Point-to-Point Protocol over Ethernet). PPPoE is used by (A)DSL Internet

connections. Usually the modem or router will store the PPPoE information so that

the DVR and other computers that are connected to the network do not require

a password to access the internet. If you use DSL, please contact your ISP for your

PPPoE information if required.

To Setup PPPoE Settings:
1. Change PPPoE setting to ENABLE.

2. Enter the Username provided by your ISP.

3. Enter the Password provided by your ISP.

4. Press ENTER on State to update the status.

If properly connected, the State will display your connection status as

being connected.

The following will explain all of the settings that are seen on screen:
• RTSP Port: Used by mobile devices to view a single camera

• RTP Start/End Port: Used in conjunction with the RTSP port to view the

steaming video footage on the mobile device

• Video Quality: The quality of footage being streamed to mobile device