Samsung SMO-150QN Manuale Utente

Eng-32

2-1) TALK KEY

The TALK KEY allows voice signal tobe transmitted to an intended camera  with built-in MIC on the

front of the monitor. For this function, select a target camera with the 

▲/▼ key on the FRONT PANEL,

and press AUD/SP SEL KEY. At this time, if a voice signal is generated through the MIC with the

TALK KEY pressed, the signal will be transmitted to the camera. 

AUD/SP SEL KEY allows users to select aStandad(SOC-C120) camera to send/receive  voice signals

with the monitor in the QUAD DISPLAY MODE(see page 96 for discription). In the QUAD DISPLAY

MODE, select target camera  by using 

▲/▼ , and press AUD/SP SEL KEY. Then “S” OSD will be

displayed on the selected screen. If you want to send/receive voice signals with another camera,

use

▲/▼ key again to select the camera, and press AUD/SEL KEY. Then, “S” OSD will be displayed

and you can send/receive  voice  signals with the monitor.

2-3) VOL+/VOL- KEY

VOL+ :  Increase sound volume from the monitor.

VOL- : Decrease sound volume from the monitor.