VIVOTEK SF8174 Manuale Utente

 

 

To attach the camera to AM-51A 

mounting adaptor, 

1. Remove the camera's top cov-

er.  

2. Fasten 2 included screws to the 

D holes (not the D+ hole). 

3. Route cables through the 

adapter. 

4. Align the camera with the 

mounting adapter and let the 

2 screws enter the key holes 

located on the sides where the 

camera's cabling interfaces 

reside, e.g., the Ethernet port. 

5. Rotate the camera counter-

clockwise. You can then see 

the D+ hole through the slotted 

screw hole (in front of the Micro 

SD slot). 

6. Fasten screws to secure the 

camera to the mounting adapt-

er.

473 mm   

178 mm   

47mm   

AM-117

AM-51A

AM-114

Install the Pendant Pipe
Below is a sample procedure 

using a pendant pipe: 

1. Determine a hard surface ceil-

ing location, and use the four 

mounting holes on the pendant 

head to mark the positions 

where holes will be drilled to 

secure the pendant head. Note 

that screws are user-supplied 

and they should be at least 

11mm long. 

2. Route cables through the pen-

dant pipe and the pendant 

head. 

Refer to the "

Panoramic PTZ Installation Guide" in your product CD for design considerations 

before you proceed with physical installation.