VIVOTEK SF8174 Manuale Utente

 

 

Power and IO cables

Connecting Cables
If you need to route cables through the side opening, proceed with the following:

1. Connect the Ethernet and the Power & IO cables. The Ethernet cable 

    is user-supplied. 

2. Use an included cable tie to secure the Ethernet and IO cable to the base plate. Insert the 

cable tie through the vertical mounting tab located on the edge of the cabling cutout. 

3. Make a clearance between cables and the vertical mounting tab. Arrange the cables neatly to 

avoid getting in the way when the dome cover is attached.   

4. Cut the extra length from the cable tie.

It is recommended to remove the strain relief boot if your Ethernet cable 

comes with one. 

Ethernet

Make a clearance 

between cables and 

the vertical tab

Strain relief boot

If you route cables through a drill hole 

on a wall/ceiling, simply route cables 

through the cabling cutout.