Avaya 03-300430 Manuale Utente

1400,

1401

FAIL 

The Echo Cancellation test has failed:

●

Error 1400 - Echo canceller function failed. The Echo Canceller 
Function test, which is executed by firmware, failed.

●

Error 1401 - Echo canceller memory failed. The Echo Canceller 
Memory test, which is executed by firmware, failed.

Echo Cancellation is no longer being supplied by the board. Clear the 

alarm using the following commands: busyout board location,  

test board location long, release board location. If the test 

still fails, replace the circuit pack.
When this test fails, echo cancellation will be bypassed on every channel 

of the board. The circuit pack can still be used for a T1/E1 line interface 

without echo cancellation. This capability provides limited service for the 

customer until the circuit pack can be changed out.

PASS

The Echo Cancellation feature is functioning properly.

0

NO

BOARD

The test could not relate the internal ID to the port (no board). This could 
be due to incorrect translations, no board is inserted, an incorrect board 
is inserted, or an insane board is inserted.

1. Verify that the board’s translations are correct. Execute  add ds1 

location to administer the UDS1 interface if it is not already 

administered.

2. If the board was already administered correctly, check the error log to 

determine whether the board is hyperactive. If so, the board was shut 
down. Reseating the board will re-initialize it.

3. If the board was found to be correctly inserted in step 1, enter 

busyout board location.

4. Enter reset board location.
5. Enter release board location.
6. Enter test board location long.

This should re-establish the linkage between the internal ID and the port.

 2 of 2