Avaya 03-300430 Manuale Utente

The battery feed chip provides power to the telephone equipment, signaling, rotary dial pulsing, 
transmission, and balance. This test checks the signaling and switchhook capabilities of the 
battery feed chip by terminating the port, applying battery and detecting the resulting current.

Note:

For the TN746B, Test #35 does not actually run and instead always returns 
PASS. Test #35 operates in the normal manner for TN746.

0

NO 

BOARD

The test could not relate the internal ID to the port (no board). This could 
be due to incorrect translations, no board is inserted, an incorrect board is 
inserted, or an insane board is inserted.

1. Verify that the board’s translations are correct. Enter list config, 

and resolve any problems.

2. If the board was found to be correctly inserted in step 1, enter 

3. Enter reset board location
4. Enter release board location
5. Enter test board location long

This should re-establish the linkage between the internal ID and the 
port. If not, verify that a valid board is inserted.

 3 of 3

ABRT

Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

 1 of 3