Avaya 03-300430 Manuale Utente
Communication Manager Maintenance-Object Repair Procedures
1814 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
Notes:
a. Error Type 0: an alarm was raised but an associated error was not entered into the
hardware error log due to a momentary overload condition caused by a burst of hardware or
software error reports. Run the long test sequence. Refer to the test description and follow
the recommended procedures.
software error reports. Run the long test sequence. Refer to the test description and follow
the recommended procedures.
b. Error Type 1: background maintenance software has reset the Packet Interface module on
an IPSI circuit pack as a fault recovery action. It is used to keep track of the number of times
that the Packet Interface is reset, independent of whether or not the Reset test passed.
that the Packet Interface is reset, independent of whether or not the Reset test passed.
1025 (
)
Any
Private Loop-Around
(#885)
MAJ
ON
reset packet-interface
location
1281 (
)
Any
None
MAJ
ON
reset packet-interface
location
1537 (
)
Any
Memory Checksum
(884)
MIN
ON
test packet-interface
location l r 2
1793 (
)
Any
Memory Checksum
(#884)
MIN
ON
test packet-interface
location l r 2
2049 (
)
Any
None
WRN
ON
test packet-interface
location r 25
2305 (
)
Any
None
test packet-interface
location r 2
2561 (
)
Any
Active-Standby Peer
Link (#888)
MIN
OFF
test packet-interface
location s r 2
2817 (
)
Any
Read and Clear test
(#887)
MIN
MAJ
ON
test packet-interface
location s
3074
3073
3072 (
)
Any
Maintenance
Loop-Around (#886)
WRN
OFF
test packet-interface
location s r 2
3585 (
)
Any
None
WRN
OFF
reset packet-interface
location
3841 (
Any
None
MAJ
OFF
reset packet-interface
location
1. A Packet Interface module on an active IPSI can only be reset if it has been taken out of service by
background maintenance software. A Packet Interface module on a standby IPSI can be reset independent
of its service state.
of its service state.
Table 668: Packet Interface Error Log Entries (continued)
Error
Type
Type
Aux
Data
Data
Associated Test
Alarm
Level
Level
On/Off
Board
Board
Test to Clear Value
2 of 2