Desa Tech CGP10 Manuale Utente
14
099403
IMPORTANT:
Hold pressure regulator with wrench when connecting it to gas piping
and/or fittings.
Figure 13 - Gas Connection
CHECKING
GAS
CONNECTIONS
Tee Joint
Reducer
Bushing to
1/8" NPT
Bushing to
1/8" NPT
1/8" NPT
Plug Tap
Plug Tap
Test
Gauge
Connection *
Tee
Joint
Pipe
Nipple
Cap
Pressure
Regulator
Regulator
Heater
Cabinet
Cabinet
3/8" NPT
Pipe Nipple
Pipe Nipple
Ground Joint Union
Sediment Trap
* An A.G.A. design certified manual shutoff valve with 1/8" NPT tap is an acceptable
alternative to test gauge connection. Purchase the optional A.G.A. design certified
manual shutoff valve from your dealer. See Accessory, page 25.
alternative to test gauge connection. Purchase the optional A.G.A. design certified
manual shutoff valve from your dealer. See Accessory, page 25.
WARNING ICON
G 001
WARNING
Test all gas piping and connections for leaks after installation or
servicing. Correct all leaks at once.
servicing. Correct all leaks at once.
WARNING ICON
G 001
WARNING
Never use an open flame to check for a leak. Apply a mixture of
liquid soap and water to all joints. Bubbles forming show a leak.
Correct all leaks at once.
liquid soap and water to all joints. Bubbles forming show a leak.
Correct all leaks at once.
WARNING ICON
G 001
CAUTION
Make sure external regulator has been installed between propane
supply and heater. See guidelines under
supply and heater. See guidelines under
Connecting to Gas Sup-
ply
, page 13.
Continued
PRESSURE TESTING GAS SUPPLY PIPING SYSTEM
Test Pressures In Excess Of 1/2 PSIG
1. Disconnect heater and its individual manual shutoff valve from gas supply
piping system. Pressures in excess of 1/2 psig will damage heater regulator.
2. Cap off open end of gas pipe where manual shutoff valve was connected.
Manual
Shutoff
Valve *
Shutoff
Valve *
From
External
Regulator
(11" W.C. to
14" W.C. Pressure)
3" Minimum
CONNECTING
TO GAS
SUPPLY
Continued