Honeywell 6150RF Dépliant
ÊK4461-1V1eŠ
K4461-1V1 4/05 Rev. A
User Mode
This mode gives you the capability of enabling and disabling individual wireless keys that have been
directly programmed into the ADEMCO 6150RF. This is particularly useful if a user loses a wireless
key.
directly programmed into the ADEMCO 6150RF. This is particularly useful if a user loses a wireless
key.
This mode may only be accessed if the ADEMCO 6150RF is powered up for at least 1 minute.
Only wireless keys programmed directly into the ADEMCO 6150RF may be enabled and
disabled using this mode.
Only wireless keys programmed directly into the ADEMCO 6150RF may be enabled and
disabled using this mode.
ENTER THE USER MODE
Press the [1] and [3] keys simultaneously for a few seconds (make sure the unit has been
powered for at least 1 minute prior).
powered for at least 1 minute prior).
CHANGING THE STATUS OF A TRANSMITTER
On the display, “dE” and “-” flashes alternately. Enter the number of the wireless key
transmitter (1-8).
transmitter (1-8).
Then “d” and the wireless key number you entered flash alternately with “1” or “0” on the
display. A “1” indicates the wireless key is enabled, a “0” indicates it is disabled. Enter [1] to
enable or [0] to disable the wireless key. All wireless keys are defaulted to 1 (enabled).
display. A “1” indicates the wireless key is enabled, a “0” indicates it is disabled. Enter [1] to
enable or [0] to disable the wireless key. All wireless keys are defaulted to 1 (enabled).
Press the [
✳
✳
✳
✳] to accept the entry.
Repeat the procedure for all the wireless keys whose status you want to change.
EXITING THE USER MODE
To exit the User mode press [
✳
✳
✳
✳] when “dE” and “–” flash alternately on the display.
165 Eileen Way, Syosset, New York 11791
Copyright © 2004 Honeywell International Inc.
www.honeywell.com/security