Dimplex EWMC-CC-SS Manuale Utente
MANUAL CONTROLS
The corner wall mounted electric fireplace can also be controlled in a similar manner to the
remote control with switches located inside the unit (FIGURE 15).
remote control with switches located inside the unit (FIGURE 15).
A. Main Power Switch
Main on/off switch, supplies power to the remote control receiving unit. When placed in the
on position Level 1 indicator will flash.
B. Manual Selection Switch
Operates the corner wall mounted electric fireplace in the same manner as the remote
control transmitter. Pressing the left side of this switch has the same effect as the ON
button on the remote control and the right side has the same effect as the OFF button of
the remote control. Pressing once to the left activates Level 1, twice activates Level 2,
three times activates Level 3. Pressing to the right turns the corner wall mounted electric
fireplace off.
Main on/off switch, supplies power to the remote control receiving unit. When placed in the
on position Level 1 indicator will flash.
B. Manual Selection Switch
Operates the corner wall mounted electric fireplace in the same manner as the remote
control transmitter. Pressing the left side of this switch has the same effect as the ON
button on the remote control and the right side has the same effect as the OFF button of
the remote control. Pressing once to the left activates Level 1, twice activates Level 2,
three times activates Level 3. Pressing to the right turns the corner wall mounted electric
fireplace off.
MAINTENANCE
WARNING
Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire,
electric shock or damage to persons.
electric shock or damage to persons.
LIGHT BULB REPLACEMENT
Allow at least 5 minutes for light bulbs to cool before touching bulbs to avoid accidental burning
of skin.
of skin.
Light bulbs need to be replaced when you notice a dark section of the flame or when the clarity
and detail of the log exterior disappears. There are two bulbs under the log set which generate
the flames and embers.
and detail of the log exterior disappears. There are two bulbs under the log set which generate
the flames and embers.
TOOL REQUIREMENTS
Slot screw driver
Slot screw driver
HELPFUL HINTS
It is a good idea to replace all light bulbs at one time if they are close to the end of their rated
life. Group replacement will reduce the number of times you need to open the unit to replace
light bulbs.
It is a good idea to replace all light bulbs at one time if they are close to the end of their rated
life. Group replacement will reduce the number of times you need to open the unit to replace
light bulbs.
LOWER LIGHT BULB REQUIREMENTS
Two (2) clear chandelier or candelabra bulbs with an E-12 (small) socket base, 60 watt rating.
LOWER BULB REPLACEMENT
LOWER BULB REPLACEMENT
1. Unplug the unit from the outlet.
2. Open latched door.
3. Remove the 3 mounting bracket screws.
4. Set aside mounting bracket.
5. Remove 2 log set screws.
6. Set log set assembly aside.
7. Unscrew the bulb(s) counter clockwise.
8. Insert new bulb(s).
9. Assemble in reverse order.
NOTE
When placing log set back into unit ensure the log set sits in between the 2 vertical
mounting flanges.
10. Plug in the corner wall mounted electric fireplace.
2. Open latched door.
3. Remove the 3 mounting bracket screws.
4. Set aside mounting bracket.
5. Remove 2 log set screws.
6. Set log set assembly aside.
7. Unscrew the bulb(s) counter clockwise.
8. Insert new bulb(s).
9. Assemble in reverse order.
NOTE
When placing log set back into unit ensure the log set sits in between the 2 vertical
mounting flanges.
10. Plug in the corner wall mounted electric fireplace.
10