Greenheck Fan LFC Manuale Utente

Pagina di 16
3
Model LFC Low-Profile Fan Coil
®
Table of Contents
Installation
Unit Layout  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Lifting / Hanging Instructions . . . . . . . . . . . . . . . . 3
Dimensions / Weights . . . . . . . . . . . . . . . . . . . . . . 4
Filter Sizes / Quantity . . . . . . . . . . . . . . . . . . . . . . 4
Coil Dimensions  . . . . . . . . . . . . . . . . . . . . . . . . .5-6
Start-Up
System Start-Up . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Troubleshooting
Blower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Motor Overamps . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Insufficient / Too Much Airflow . . . . . . . . . . . . . . . 8
Excessive Noise or Vibration . . . . . . . . . . . . . . . . 8
Start-Up
Coil Module . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-10
Drain Pan / Drain Trap  . . . . . . . . . . . . . . . . . . . . 10
Maintenance
Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Coil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Drain Pan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Reference
Start-Up Documentation . . . . . . . . . . . . . . . . . . . 12
Maintenance Log  . . . . . . . . . . . . . . . . . . . . . .13-15
Warranty  . . . . . . . . . . . . . . . . . . . . . . . . .Backcover
Unit Layout
Lifting Instructions
Greenheck’s Low-Profile Fan Coil (LFC) should be 
lifted by the factory supplied lifting lugs or frame rails 
and a spreader bar (by others) to prevent damage 
from occurring to the equipment (see Figure 1). Avoid 
twisting or uneven lifting of equipment. Do not lift 
equipment by coil connections or headers. The unit 
must remain upright during lifting. All access doors 
and panels must be closed during lifting to avoid 
damage.
1.  Fan Section
2.  Coil Section 
 •  Chilled Water
•  Hot Water 
 •  DX Coils
•  Steam Coils
3.  Inlet Filter 
Vertical inlet filter with quarter-turn fasteners
4.  Lifting Lugs/Hanging Brackets 
Six (6) lifting lugs for each unit
5.  Side Access Panels 
Right and left access to each unit. (Image shows 
panels removed).
6.  1
1
4
 inch knockout is provided for the recommended 
electrical wiring penetration or disconnect switch.
Hanging Instructions
The LFC should be hung by the factory supplied 
lifting lugs or field supplied frame rails as shown 
respectively in Figures 2 and 3. All hanging brackets 
must be used to mount the unit. The LFC is available 
with both external neoprene and spring isolation 
options.
Figure 2
Figure 3
Frame Rails
Spreader Bar
Lifting Lugs
Figure 1
Airflow
 2
 4
 5
 5
 1
 6
 3