Phantom Tech VI0508 Manuale Utente

Installing the

Top Rail

and

Catch Frame

Installing the Top Rail

1. Remove the backing of the adhesive tape on the

top of the Top Rail.

2. Insert the Rollers at the top of the Sliding Bar

into the Top Rail, then push the Top Rail into the

Corner Cover on the top of the

Mounting Bracket.

3. Position the Top Rail along the top of the door

frame at a 90º angle to the side

mounting surfaces.

4. Making sure that the Top Rail is tight against the

side of the door frame opposite the

Mounting Bracket, press firmly in place,

allowing the adhesive tape to temporarily hold

it in place.

5. Using the 5/8” (16mm) screws provided, secure

the Top Rail to the door frame.

Installing the Catch Frame

1. Insert the bottom of the Catch Frame inside the

Bottom Rail and the top of the Catch frame into the

Top Rail. Position it against the door frame on

the opposite side of the Screen Housing Assembly.

2. Lift the Catch Frame upward into the Top Rail

as far as it will go, and secure to the door frame

using the provided wood screws.

Top Rail

Catch Frame

Latch

Door Frame

Push up the top of the

Catch Frame all the way

into the Top Rail

Push in

to the

Corner C

over

Corner Cover

Mounting Bracket

Insert Rollers

as shown