Heath Zenith 3035466 (AC-6180) Manuale Utente

-2-

12345

678

4.  Mount  push  button.  Use  either  screws  or 

double sided tape to mount push button.

To  mount  with  screws,  remove  back  of  case  by 
pushing  in  tab  on  bottom  with  a  small  screw-
driver.
Attach back of case to door jamb or wall. Snap front 
of push button on.
When  attaching  push  button  using  double  sided 
tape, make sure the surface of the door jamb or 
wall is clean.

5.  Mount chime. There are two different ways to mount the chime depending 

upon the model of chime purchased. Determine which model you purchased 
below. Mount the chime according to the instructions for your chime.

Chime with sawtooth hanger attached to back:
1.  Drill 1/4" diameter pilot hole for wall anchor (provided) and insert anchor.
2.  Screw #8 screw (provided) into anchor. Leave 1/16" gap between screw 

head and wall.

3.  Place hanger over screw to mount chime.

Jumpers

Chime Volume

Sawtooth Hanger