Heath Zenith 598-1127-03 Manuale Utente

A B C 1 2 

3

This package includes (Style of push button and chime 
may vary from illustration):
•  Wireless Christmas bell chime
•  Wireless push button with battery
•  Hardware pack
This  chime  requires  3  "AA"  alkaline  batteries  (not 
included).  In  typical  use,  alkaline  batteries  will  last  up
to 6 months.

© 2008 HeathCo LLC

598-1127-03

1.  Install alkaline type A23 12 volt push button 

battery  (included).  Remove  back  of  case  by 
pushing in tab on bottom with a small screwdriver
(see Figure 1). See diagram inside push button for
correct battery orientation. Note: If batteries are 
preinstalled, remove orange battery tab.

2.  Open  chime  battery  compartment.  Press  in 

latch on rear of chime and lift off battery cover

 

(see Figure 2).

3.  Install  3  alkaline  "AA"  batteries.  Make  sure 

batteries are oriented properly

 

(see Figure 3).

4.  Test  range. Temporarily  position  chime  and 

push  button  where  you  want  them  mounted.
Press push button to verify chime and push but-
ton work properly. If chime does not sound, see
Troubleshooting.

Keyhole

Jumpers

AB

C1

23